czwartek, 26 stycznia 2012

jak zrobić Meble z kartonu ( Cardboard furniture)

Bardzo potrzebowałam mebelka do składowania drobiazgów. Postanowiłam więc zrobić coś z niczego.
Oto wykonana przeze mnie kartonowa szafeczka. Szkielet stanowią poprzycinane kawałki kartonu a całość oklejona jest papierem z katalogu IKEI. Mój przepis na udany klej podam później.

I really needed something to store my stuff in so I've decided to make some creative recycling:)
Here is the cardboard piece of furniture I made yesterday. After putting pieces together, drawer was covered with some IKEA magazine paper.



Oto schemat mebli.
Po wycięciu wszystkich elementów łączymy je w całość taśmą klejącą a później oklejamy papierem.


Jeśli chcemy żeby szuflady były z typu tych niewypadających należy nadać im lekko trapezowy kształt od środka (zmienią się więc nieco wyglądy spodów). Pamiętajcie, że szuflady muszą być mniejsze niż otwory na szuflady. Tylko wtedy będzie można je swobodnie wysuwać i wsuwać.
Cut all the elements in the pic of the cardboard: 2 tył i przód- back and front / 2 boki- sides/ 2 fronty szuflad- fronts of the drawers/ 2 spody szuflad- bottoms of the drawers/ 2 góra i dół - upper and down part/ 6 góra i dół środki - inner parts  of upper and bottom parts of drawers' holes/ 6 boki szuflad i dziury- sides of the drawers and holes/ 2 tyły szuflad- backs of the drawers/ 4 nóżki z pudełek- legs made of boxes.

Use the pic above to get the idea of all the necessary elements to be cut out and their sizes.

Once u're done with cutting just put the elements togetner with the duct tape. Then comes the time for glue and newspapers. Tear newspapers into pieces and dip them into the glue. Put the pieces all over ur new piece of furniture. Make sure all is well covered. Leave the furniture to dry and enjoy.

Useful hint: Remember that the drawers need to be smaller than drawers holes. That's how u can put them in and out freely.
PEACE




2 komentarze: